LOOKING FOR PRICING?
Please reach out in our LIVE CHAT, located in the lower right hand corner.
We are happy to help!
(this message can be removed by clicking “close” in the upper right hand corner)
CHD – Air Curtain
- Max Mount Height: 14 ft.
- Item #: POW04-CHD
DACO Corporation is a proud distributor of Powered Aire who is a manufacturer of air doors for controlling environmental elements within facilities. Their air curtains can be range from hot to cold and can ensure your facility stays at your desired temperature without worry.
NON STOCK ITEM - Ships from Greenville, PA 16125
Heavy duty CHD (Chameleon Air Curtain is designed to be installed into the ceiling over customer entry ways when a standard air door can not be exposed mounted or was not an available option. They provide protection from the dust, debris and insects of everyday life, by blowing an controlled stream of air down across the door, they keep indoor air in and outdoor air out and to help improve customer comfort and satisfaction, employee productivity and maintain sanitation levels.
These commercial industrial doors are designed for maximum mounting heights of up to 14" for environmental separation and come in (12) sizes from 36" to 12" long.
Construction - 18 Gauge Steel Casing
Recommended Maximum Mounting Height - 14 ft. Environmental Separation
Options Available - Unheated, Electric Heat, Hot Water & Steam Heat
THE POWERED AIRE DIFFERENCE
- Other air curtains aim the discharge of each blower down, resulting in dead spots wherever there are spaces between the blowers.
- A CHD air curtain aims the air from the blowers towards the back of the air curtain, where it fills a plenum and is then forced out evenly across the length of the air curtain.
CHD OPTIONS AVAILABLE:
- Unheated
- Electric, Hot Water and Steam Heat
CHD RECOMMENDED:
- High End Retail Facilities
- Schools
- Banks
- Casinos
- Hospitals
CHD AIR CURTAIN FEATURES:
- Made of 18 gauge steel.
- Access panels for inspection, cleaning and removal of motor blower assembly.
- Heavy duty 3/4 hp, 1630 rpm, single phase motor.
- Multiple speed motor(s) to control air volume down from maximum speed.
- Provides uniform velocity across the entire length of the discharge area.
- Galvanized centrifugal fan, double inlet design with zinc plated hubs.
- Protective inlet screen.
- Discharge nozzle designed so that air leaves on a 6 degree plane.
- Directional air foil vane.
- Top mount with bottom air intake.
- Made in the USA.
Construction – 18 Gauge Steel Casing
Recommended Maximum Mounting Height – 14 ft. Environmental Separation
Options Available – Unheated, Electric Heat, Hot Water & Steam Heat
-
Powered Aire Industrial Air Curtain Industrial Brochure